0
0,00 €
Weiter einkaufen
Gesamtbetrag: 0,00 €
 
 
 
 
 

B-Band A2.2

E-Mail
 
Artikelnummer: pickups_011
Verkaufspreis inkl. Preisnachlass
Verkaufspreis119,00 €
Preisnachlass
Steuerbetrag19,00 €
B-Band A2.2 dual input / mono output endpin preamp w/ XOM and mini vol & mix for use with UST & AST
 
 

The B-Band A2.2 with XOM* is the future of acoustic guitar sound reproduction design. This dual input / mono output onboard preamp is set up for use with the acclaimed combination of UST and AST transducers. These, along with the convenient onboard remote XOM mix and volume controls, that mount just inside the edge of the soundhole without modification, bring the best of both transducers\' characteristics together resulting in a sound that is true to the guitar\'s unique voice.

The entire A2.2 systems installs quickly and easily only requiring two holes to be drilled - one under the saddle for the UST and one for the endpin output jack / strap button. For fast connection all components are plug-in - no soldering.

The preamp mounts inside the guitar at the back and has input gain trims for both transducers that are adjustable with a screwdriver. The preamp is housed in lightweight all-metal box and is powered by a 9-volt battery. All mounting hardware, including a high quality endpin jack and hold-tight battery clip, are supplied.

A2.2 Features:

  • XOM process
  • Remote soundhole XOM mix and volume controls
  • Dual channel input (UST and AST only!)
  • Mono mix output
  • UST and AST input gain trim
  • All plug-in connections
  • Hold-tight battery clip
  • 400 hour battery life
  • High quality output jack

A2.2 Specifications:

  • S/N ratio: Greater than -90 dB
  • Distortion: 0.05 %
  • Frequency response: 50 Hz - 40 kHz (-3 dB)
  • Low-cut slope: 24 dB/octave
  • Voltage gain: AST channel, 0 - +24 dB; UST channel, 0 - +24 dB
  • Input impedance (both channels): 50 Mohm || < 10 pF
  • Output impedance: < 3 kohm
  • Nominal output level: -10 dB u (0.245 Vrms)
  • Power supply: 9 V battery (not included)
  • Current consumption: 0.8 mA typical
  • Connections: Transducer inputs, 2.54 mm / .10" header; Output, 6.3 mm / 1/4" jack
  • Weight (with accessories): 45 g
  • Dimensions: L 42 mm / 1.65", W 32 mm / 1.26", H 15 mm / 0.6"

Kundenrezensionen

Es gibt noch keine Rezensionen für dieses Produkt.
 
 
Copyright © 2019 By New Acoustic Gallery . All Rights Reserved.